The Aeotec Door/Window Sensor 7 is a window sensor that precisely detects whether your window is open, closed or tilted, which requires a tilt angle of at least 5°. It can be easily retrofitted to the window. In addition, you can use the Aeotec Door/Window Sensor 7 to integrate other binary sensors such as NTC contacts, microswitches or flood sensors into your Z-Wave system.
Thanks to its slim design, the Aeotec Door/Window Sensor 7 can be installed inconspicuously on any window. The sensor is simply installed on the sash frame. In addition, a small magnet is installed near the sensor on the window frame.
With the potential-free input of the Aeotec Door/Window Sensor 7, it is also possible for the sensor to integrate other sensors into your Z-Wave system, for example. For this purpose, the binary sensors are connected to the potential-free input of the sensor. In addition to sensors, buttons can also be connected there, which e.g. start a scene in the Z-Wave control panel.
If your Aeotec Door/Window Sensor 7 should ever let you down, the core - the circuit board - can be easily replaced without removing the sensor. This allows you to leave the device stuck to the window frame and only replace the circuit board.
More information about Aeotec Door/Window Sensor
alphared cybersecurity GmbH & Co. KG
Breslauer Straße 49
04299 Leipzig (Germany)
Fon: +49 (0) 341 / 860 70 80
Fax: +49 (0) 32 12 / 104 30 74
Mail: info@alphared-cybersecurity.com